Udp: Cannot Create Udp/udp6 Socket: Address Family Not Supported by Protocol (Errno=97)

Goto folio Previous  1, 2, 3, 4, 5  Next View previous topic :: View next topic
Author	Bulletin
dragonC DD-WRT User Joined: 23 May 2015 Posts: 270	Posted: Mon December xix, 2016 18:43   Post subject: <Kong> wrote: dragonC wrote: <Kong> wrote: dragonC wrote: <Kong> wrote: labo wrote: In that location are a new time stamped files with 12/19. Any inkling on what is fixed compared to 12/18? Openvpn Server fix + quick dnscrypt webif support. Right at present dnscrypt uses a fixed dns server, information technology is missing a selection or text field where you can choose the dnscrypt server. OpenVPN server yet doesn't work for me on the newer build (R7000). Practice you recommend to scroll dorsum or there'southward another build coming? Cheers! Information technology is probably another consequence with the server, every bit I merely fixed the pre-down effect as in the client part. Only accept to run a exam with a server config to see what other changes are needed. Do you need a failing config to reproduce? Or you've got ane already? If you can heck on the startup fault in /var/log/letters it will help as it may indeed be config specific. I flashed back to the b30910 afterward your first response (I need the VPN then) so I lost that log. If that'southward absolutely needed I could probably flash back to the new build and endeavour again. My config is rather standard though -- will it be more than fruitful to share the config? (and is in that location rubber fashion to do so without sending over the keys and certs?)
Back to top
Sponsor
hurleyp DD-WRT User Joined: ten Sep 2009 Posts: 365 Location: Ottawa, Ontario, Canada	Posted: Mon Dec 19, 2016 20:40   Postal service field of study: Router: Netgear R7000 Firmware: v3.0-r30955M kongac (12/18/16) Kernel: Linux 4.4.39 #156 SMP Sun Dec 18 00:10:07 CET 2016 armv7l Status: Up and running for about 24 hours Reset: Soft boot earlier and later on ddup Errors: None Upgraded via ddup --flash-latest from r30910M. No "erase nvram" this fourth dimension. Running polish and the temperatures are good: CPU 56.iv °C / WL0 44.iii °C / WL1 47.3 °C (My R7000 is wall-mounted.) I'yard non currently using OpenVPN, and then I can't speak to its operation with this build. Electric current bones R7000 setup (subject to change of class): - Static IP - DHCP Enabled - No VLANS - Wireless: Regulatory Domain = UNITED_STATES, wl0 G-Only (ch. 7), wl1 NA-Mixed (ch. 161 + 159), AES - SNMP enabled, SSH enabled, Telnet disabled - Firewall enabled, Log Level high - Syslog: remote to Logentries - YAMon three.1 - USB Flashdrive mounted equally JFFS, adblocking via pixelserv - NO: ttraf, VNC, Zabbix, VPN, Radius - NO: Port forwarding, UPnP, DMZ, QoS - NO: Samba, CIFS, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r48425 std (02/24/22) EdgeRouter-Ten: EdgeOS v2.0.nine-hotfix 2
Back to superlative
gseeley DD-WRT Novice Joined: 02 May 2014 Posts: 17	Posted: Tue December 20, 2016 1:02   Post subject: Router: Asus RT-AC3200 Firmware: DD-WRT v3.0-r30955M kongac (12/eighteen/sixteen) Kernel: Linux iv.4.39 #158 SMP Sun Dec 18 23:12:04 CET 2016 armv7l Previous: 30910M Status: OK Reset: NO Errors: VPN OpenVPN configuration that worked in 30910M doesn't work now in 30955M. I don't take IPv6 enabled merely it looks like the VPN might be trying to use it: Lawmaking: December twenty 00:40:32 gateway daemon.notice openvpn[1390]: do_ifconfig, tt->did_ifconfig_ipv6_setup=0 ... Dec 20 00:40:32 gateway daemon.warn openvpn[1390]: Could non determine IPv4/IPv6 protocol. Using AF_INET6 Dec 20 00:forty:32 gateway daemon.err openvpn[1390]: UDP: Cannot create UDP/UDP6 socket: Accost family not supported past protocol (errno=97) December 20 00:40:32 gateway daemon.find openvpn[1390]: Exiting due to fatal error
Back to tiptop
CloneVince DD-WRT User Joined: 31 May 2014 Posts: 219	Posted: Tue Dec xx, 2016 ix:01   Post subject: New build is uploading. New version of 30955M. _________________ Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
Dorsum to top
SmallvilleLA DD-WRT Novice Joined: 03 Jun 2016 Posts: 20	Posted: Tue December xx, 2016 ix:46   Post discipline: Custom DNSMasq.conf <Kong> wrote: e3000usr wrote: Router: Asus RT-AC56U Firmware: DD-WRT v3.0-r30955M kongac (12/18/16) Kernel: Linux 4.4.39 #156 SMP Sun Dec 18 00:10:07 CET 2016 armv7l Previous: 30910M Condition: OK Reset: NO Errors: NONE Will DNSCrypt be coming in a release before long? Thanks Kong for your piece of work. dnscrypt-proxy is included in latest build, there is no gui setting for it nevertheless and it does not starting time automatically, merely should exist working if started through cmd/startup script etc. It is besides possible now to place a custom dnsmasq.conf in /jffs/etc/dnsmasq.conf Kong, what's the process to use the custom dnsmasq? Simply put the file in /jffs/etc? Besides, I accept a printer/scanner philharmonic. Annihilation available in opkg that enables the scanner function? I have the printer going. edit: It appears Samba Server supports the scanner too. Whew! R7000 30955 USBHDD & USBPrint - All good so far
Dorsum to peak
<Kong> DD-WRT Guru Joined: 15 Dec 2010 Posts: 4339 Location: Germany	Posted: Tue Dec xx, 2016 xi:22   Post subject area: gseeley wrote: Router: Asus RT-AC3200 Firmware: DD-WRT v3.0-r30955M kongac (12/eighteen/16) Kernel: Linux 4.iv.39 #158 SMP Sun Dec xviii 23:12:04 CET 2016 armv7l Previous: 30910M Status: OK Reset: NO Errors: VPN OpenVPN configuration that worked in 30910M doesn't work now in 30955M. I don't have IPv6 enabled just it looks like the VPN might exist trying to utilize it: Lawmaking: Dec 20 00:40:32 gateway daemon.find openvpn[1390]: do_ifconfig, tt->did_ifconfig_ipv6_setup=0 ... December xx 00:twoscore:32 gateway daemon.warn openvpn[1390]: Could non determine IPv4/IPv6 protocol. Using AF_INET6 Dec xx 00:40:32 gateway daemon.err openvpn[1390]: UDP: Cannot create UDP/UDP6 socket: Address family unit not supported by protocol (errno=97) December xx 00:40:32 gateway daemon.notice openvpn[1390]: Exiting due to fatal error Try the updated build I uploaded this morning time. _________________ KONG PB'due south: http://www.desipro.de/ddwrt/ KONG Info: http://tips.desipro.de/
Dorsum to top
gseeley DD-WRT Novice Joined: 02 May 2014 Posts: 17	Posted: Tue Dec 20, 2016 eleven:37   Post field of study: <Kong> wrote: gseeley wrote: Router: Asus RT-AC3200 Firmware: DD-WRT v3.0-r30955M kongac (12/eighteen/16) Kernel: Linux four.4.39 #158 SMP Dominicus Dec xviii 23:12:04 CET 2016 armv7l Previous: 30910M Condition: OK Reset: NO Errors: VPN OpenVPN configuration that worked in 30910M doesn't piece of work now in 30955M. I don't have IPv6 enabled but it looks like the VPN might exist trying to use it: Code: Dec xx 00:40:32 gateway daemon.detect openvpn[1390]: do_ifconfig, tt->did_ifconfig_ipv6_setup=0 ... Dec 20 00:40:32 gateway daemon.warn openvpn[1390]: Could not determine IPv4/IPv6 protocol. Using AF_INET6 Dec 20 00:40:32 gateway daemon.err openvpn[1390]: UDP: Cannot create UDP/UDP6 socket: Address family unit not supported by protocol (errno=97) December 20 00:40:32 gateway daemon.observe openvpn[1390]: Exiting due to fatal error Try the updated build I uploaded this morning. Thanks Kong. OpenVPN service is running on this revision with IPv6 disabled. I'll try a remote connexion afterward when I'm at work and written report back if it doesn't work.
Dorsum to meridian
Acid_Flash DD-WRT Novice Joined: 11 Nov 2009 Posts: 31	Posted: Tue Dec xx, 2016 14:57   Post subject: gotjazz84 wrote: Not about the build but about your hosting: both the link in your signature and trying to update via ddup requite me a 403. Edit: nevermind. Must be on my stop. I can attain you from my mobile. Sorry almost the noise Edit2: weirdly someone from a rhead fo a november build had the same problem and was also from republic of austria. Since I don't approximate you lot're blocking Austrians it must be our ISP I am from Austria too and have no problems. My ISP is Salzburg AG / Cable Link
Back to top
gotjazz84 DD-WRT Novice Joined: 14 December 2016 Posts: 8	Posted: Tue December twenty, 2016 15:10   Post discipline: Acid_Flash wrote: gotjazz84 wrote: Non about the build but nigh your hosting: both the link in your signature and trying to update via ddup give me a 403. Edit: nevermind. Must be on my end. I can reach y'all from my mobile. Sad about the noise Edit2: weirdly someone from a rhead fo a nov build had the same problem and was likewise from austria. Since I don't judge you're blocking Austrians it must be our ISP I am from Austria as well and accept no problems. My Internet access provider is Salzburg AG / Cable Link Mine is UPC in Vienna. I had to connect to a VPN to use ddup. (i first tried to change my wan MAC to get some other IP simply I couldn't connect with that either). I'd practice this customer side merely I wasn't sure if the STD bin without router name was the right one for me to update with so I idea I'd allow ddup handle that
Dorsum to peak
srwal DD-WRT Novice Joined: 04 Jul 2013 Posts: 44	Posted: Tue Dec twenty, 2016 16:xiv   Post subject: OpenVPN however giving issues with the 12/xx timestamp. The 12/18 timestamp works fine. Until the issue is corrected, i reverted to 30910M
Dorsum to elevation
<Kong> DD-WRT Guru Joined: 15 Dec 2010 Posts: 4339 Location: Federal republic of germany	Posted: Tue Dec 20, 2016 17:09   Post subject: srwal wrote: OpenVPN still giving issues with the 12/20 timestamp. The 12/18 timestamp works fine. Until the issue is corrected, i reverted to 30910M Any details about the problem? _________________ KONG PB's: http://world wide web.desipro.de/ddwrt/ KONG Info: http://tips.desipro.de/
Back to top
wabe DD-WRT Guru Joined: 17 Jun 2006 Posts: 821	Posted: Tue December 20, 2016 17:14   Mail subject: Upgraded ASUS AC68U to this build. Everything works except Openvpn in Server-bridge mode. Information technology tries to piece of work in ipv6 mode and throws an fault. Previous on 30910 which worked perfect. _________________ Netgear R7000 on Build 48402 Asus Ac-AC68U rev. C1 on Build 48402 Asus Ac-68U rev. A1 on Build 48322 Asus Air-conditioning-68U rev. A1 on Build 47618
Back to top
dragonC DD-WRT User Joined: 23 May 2015 Posts: 270	Posted: Tue Dec 20, 2016 21:06   Postal service field of study: OpenVPN works on the 12/xx build for me
Back to top
srwal DD-WRT Novice Joined: 04 Jul 2013 Posts: 44	Posted: Tue Dec 20, 2016 21:xviii   Post subject: <Kong> wrote: srwal wrote: OpenVPN nevertheless giving issues with the 12/20 timestamp. The 12/18 timestamp works fine. Until the result is corrected, i reverted to 30910M Any details about the trouble? OpenVPN client is constantly in a WAIT country, this is subsequently thirty+ mins. When I reverted back to 30910, information technology was connected after 1min
Dorsum to tiptop
<Kong> DD-WRT Guru Joined: xv Dec 2010 Posts: 4339 Location: Germany	Posted: Tue Dec 20, 2016 21:26   Post subject: srwal wrote: <Kong> wrote: srwal wrote: OpenVPN still giving issues with the 12/20 timestamp. The 12/18 timestamp works fine. Until the upshot is corrected, i reverted to 30910M Whatsoever details about the problem? OpenVPN client is constantly in a Look state, this is later on 30+ mins. When I reverted back to 30910, it was connected later on 1min Connects immediately hither and since yous are non showing me any fault log I must assume it is user error. Likewise just checked tun/tap server fashion, both are working fine. _________________ KONG Atomic number 82'south: http://www.desipro.de/ddwrt/ KONG Info: http://tips.desipro.de/
Back to height
Goto page Previous  1, two, 3, four, 5  Next Brandish posts from previous:   Page 3 of 5

harrisgothys.blogspot.com

Source: https://dd-wrt.com/phpBB2/viewtopic.php?p=1058520&sid=5a4ce320aafc3f9d4d171f881fa55265

Share this post